How can we help you?

Roku Link Code Error 001 | Solve Activation Link Error

Published On: December 3, 2019 Category: Error Code

If Roku Link code error 001 displayed every time you attempt to activate your Roku device. It points out that there is something wrong with your Roku link code or Roku server.

If you ‘cannot connect to Roku ‘ & looking for the solutions to fix Roku link error 001. Stay tuned till end…

Roku Link Code Error 001

What do you Understand by Roku Link code error 001?

Whenever you encountered  “Roku Error 001” and the message “not connected” on the upper right corner of the TV screen, it usually refer that the Roku server has denied  to accept Roku Activation Link Code.

It can be due to technical error at server end or you’re punching expired or misspelled code. In simple words, Roku 001 code error is a code activation error.

Now the question arise – why you’re getting the Roku Link code 001 errors? So let’s start exploring the root cause behind this…

Common Reasons Causing Roku link code error 001?

Including poor internet connection, there are many other reasons responsible for Roku link 001 error code, such as:

Wrong Roku Link code

If you’re punching wrong, misspelled, expired or used code to activate your Roku device, it ultimately ends with displaying Roku 001 error.

Note: Using one Roku account, you can only activate a single Roku device at a time. If you’re trying to connect your device with a Roku account already in use, it will also generate 001 error.

Unable to connect Roku Server

There is an issue at the server end. Or your Roku services are terminated temporarily.

Incorrect Device setup

You haven’t set up your Roku player/device properly. For instance, you may have connected HDMI ports to the wrong port or skip a wire to connect with your device. Likewise, the issue can also trigger if Roku Wireless Connection Setup is not done properly. For instance if you’re connecting to wrong network then your roku will not going to work.

Poor Internet connection

Yes! Roku Link Code Error 001 can also be a symptom of defective intermittent internet. Or if your home network is not working. Simply put if your device has poor signal strength to transmit the electrical signal to Roku device it will result in error code 001.

Site Inaccessible/blocked by ISP Provider

Sometimes, your internet service provider has blocked some of the sites to access on a particular region. Thus, when you try to access the to get your code to activate your device it refuge to work.

In case, you’re unable to find Roku activation code for Netflix despite of working & active internet, then reboot your device and try again.

Roku Model is not accessible

Some of the Roku models are only accessible in the country they have been getting sold. For example, you can’t use a Roku model in China, which you have bought in the USA.

As the Roku Channel Store Server is not accessible to every region.

Also, if you encountered with the Roku code error 009 while connecting your device to internet you may read the Roku troubleshooting steps to get the detailed solutions and tips to fix and avoid the error.

Important: However, you can use the VPN services of one of the supported regions such as USA, Canada, UK to enjoy Roku device services in your local region.

Here the list of root cause for Roku link code 001 error finishes, now you must be wondering for the solutions to resolve this.

So let’s get started!

Steps to Resolve Roku Link Code 001 error

Follow the simple and effective solutions one by one as listed below:

Restart Your device

The best and simple solution to fix any technical issue is performing switch ON/OFF the device. Turn off the main switches for 10-15 seconds and try again to activate your Roku device to TV.

If you get the same error again, keep reading for further solution.

Also, if you’re unable to add channels to Roku then you must read Roku can’t add channels Troubleshooting guide for best & effective solutions.

Turn Off the VPN

Make sure you’re not using any VPN services to access Roku services. As it may prevent or block the Roku link code web page to appear or work properly.

To do so,

  1. Click on the start button >>>>>choose Control panel.
  2. On the next screen, select ‘change adapter setting’ on the left side of the window
  3. A window will open up with all network, see for the VPN network>>>>>right click to it and make it disable.

Troubleshoot your Internet Connection to fix Roku Link Code Error 001

First, verify whether you’re using wireless or wired connection to connect your Roku device with internet.

Furthermore, if you’re getting 001 error code while connecting Hulu Channel On Roku, you may find this page useful in order to learn important prerequisites required to add Hulu on your device.

In case of wired Connection follow the below steps to troubleshoot:

If you’re using a wired connection, make sure your Ethernet cable is properly attached to both router and Roku device. In case you’re unable to find any issue with Ethernet cord,  you may consult with your ISP for a better solution.

However, sometimes the internet is working but the signal strength is not enough and poor. In this scenario, you may plugged out the wires and reconnect them and try again to see if this fix Roku Link Code Error 001.

If you’re using wireless Connection

Before troubleshooting your wireless connection:

  • Make sure you’ve selected the correct wireless network
  • You’re using the correct credentials (username, password)
  • Your Roku device and router is under the wireless signal range
  • Your wireless network has enough signal range

Note: You can boost your signal strength by simply placing your Roku device nearby your router device.

  • Your router is properly working and powered on

If you find all said factors fine, and still unable to connect your Roku device, here is what you need to do..

First,  disconnect your wireless network and wait for a while. Now, connect to your home network again using authenticate username (also known as SSID) and password.

If you’re still unable to fix this…..

Check your connection
  1. Simply, press home by Roku remote >>>>>Navigate to Settings menu on your Roku device.
  2. Under settings menu, choose  Network >>>>now, select Check connection
  3. It will start scanning for the connection error ( network signal, speed, etc).

If it detects any glitches, you will be asked to perform on-screen instructions to help resolve the issue. You may also read Roku won’t connect to internet guide to learn some effective solutions and suggestions how to fix internet errors on your own.

Important: you will be able to see Check connection option, if your Roku device is connected to a valid network, otherwise it won’t appear.

Often, more than 65% of folk get rid of Roku link code 001 error by simply troubleshooting the internet connection, if you’re still in the same shoe, you need to read our next solution…

It is an effective way to resolve Roku link code error 001. Simply switch off/unplug your router and connect directly to modem to get internet access to Roku device.

Note: The above method is applicable if you’re using stand alone router, in case you’ve integrated signal devices (modem + router functionality) simply unplugged it for a couple of minutes and try again.

If the problem persists after attempting this, you should reset your router/modem device.

Reboot Your Modem/Router

Doing this will set all the settings back to its default inputs, fix internet connection problems and can faster the internet speed.

Here are the steps to Reboot Modem:

  1. To begin with, Remove the main power source from the back of the modem.

Important: Verify that all the lights on the modem are turn off when you unplugged the main power cord.

  1. Wait for a couple of minutes and re-attached the power cable back into the modem.
  2. Once the lights turn green, try again to connect your Roku device with internet.

Steps to Reboot Router

It is a good practice to reboot your router if you’re getting frequent internet issues. Here is how to do that:

To reset your router:

  1. Find the Reset button, usually located at the back of the router

Note: Make sure your router device is ON, while you perform reboot.

  1. Using a pin press and hold the Reset button gently for 15- 20 seconds.
  2. Wait for some time or till the router light change.

Once it is done, check whether the internet connection works properly or not. If it not..

Try different Location to fix Roku Link Code Error 001

If you’re still facing the same issue even after trying the above-said points, change your country at the initial stage of setup and try again. Many a time, the error 001 get resolved by simplifying selecting different location while setting up Roku device to Roku account.

Factory Reset Your Roku Device

You can reset your Roku streaming device by device settings or through reset hardware button.

To reset Roku device from the device settings:

  1. Using Roku remote, locate and press the Home button
  2. The home window will appear on TV, Navigate to Settings.
  3. Under this menu, choose System option.
  4. Next, select Advanced system settings form the list.
  5. Finally, choose Factory reset option

Performing this will erase all your account preferences and account settings. After performing this, you will hardly get any error, in case you encounter the same error again…

Change Your Roku device

In the worst case, if you can’t fix the Roku link code error 001, it refers that your Roku device is  damaged. Here you need to change your Roku device with the latest model available in market.

In case you need more help, you may directly consult with our Roku professional to get resolved your problem.